A lot of it for me was on-the-job learning. The learning curve for this tool is pretty steep if you don't know what you're doing. Having the ability to attach a name to the data, right from the device, would be helpful. It sends it to the cloud and provides an email about it. When I test a connection, it doesn't give me a place to name the results.
#Wireshark alternative for android full#
Using some of the other tools supplied by the NetAlly support care, that run with LinkRunner, really hurts us because if we have to keep purchasing the product, we can't keep using the full potential of the tool. This means there is no way to determine whether a transceiver is going bad if it's still functional. Unlike using an application like Wireshark, this device gives us no way to see network packets specifically to look at what's going on. It was slow, and the problem was intermittent, but there was no way to really identify the issue. Ultimately, it was that a transceiver was going bad but we couldn't tell because it was still functional. We were having trouble diagnosing a slowness on our network and using this tool, we weren't able to determine where the problem was. If I could name it inside the actual device, and then have it transmit the data to the cloud automatically, it would be one less step that we have to do. This makes it very nice and easy to see. I don't think that I can do this from the device itself when I test. It keeps the information in the cloud and I have the ability to name it. In terms of documenting ad hoc additions and other changes to wired ethernet connections, this product is very good. It will go through the network, it will tell you how fast the traffic is moving, the return cycle, and other relevant information. With most of our testing, this solution makes it pretty simplistic. Using the AutoTest features wipes out more than half of my work. I also use it when I have to probe out a link and check the connections in between. It provides me with information such as the name of the switch, the port number, and the VLANs.
The AutoTest feature is one that I use quite significantly. The fiber connections are great, and this feature makes a huge difference. This device tells me the name, port number, VLANs, and other details. If I'm using a laptop then usually, all I can see is where I can reach Google. This is a feature that saves me time and helps with the management of the results. As a network engineer, it's really useful to have and be able to look at testing in the past. The fact that the test results are automatically saved into NetAlly's Link-Live Cloud Service is pretty important to me. This feature is great when I'm in the field. It sends me all of the information that I need to make changes. If I need to give this device to a level one engineer, they can run and plug it into the port, and then an automatic email is generated. The integration with the cloud system is very good. The telnet feature has come in handy because I no longer have to carry a laptop with me to test connectivity. Then, I can see the data back at my end, and make the appropriate changes. It gives me everything at a glance and I can just give it to somebody in the field, and they can do it themselves remotely. It is one of the better tools I've used in a long time. In terms of the speed at which LinkRunner provides results, it's really good. However, when we're trying to diagnose why there's slowness on campus, that's pretty hard to figure out, even with this specific tool. When it goes to DHCP and out to the internet, it is great and again, not a problem. When it comes to easy stuff like going from a client to a switch, it's very easy to find it and it's not a problem. Recently, we had a problem with fiber connections and determining our slowness on campus. It eliminates half the problems that I have when testing. Calls that took me between an hour and an hour and a half, now take about 15 minutes.įrom the point of testing all the way through to the switch, including DHCP and DNS, this solution is very important. Some of my calls are pretty quick but if I didn't have the tool, they would take longer.
It has definitely helped in terms of saving time and costs, as well as improving efficiency. Using it means that instead of having to use several pieces of equipment, I now just need one to do all that I need at any given point. As long as I have the IP address, I can directly connect to the hardware and make the changes. I just recently started using the telnet feature and it is helpful because previously, I had to carry a laptop with all of the correct connections set up.
LinkRunner's ability to simplify network validation is pretty good.
0 kommentar(er)
